Vinyl is one of the most versatile, durable, and flexible building materials, but it does require a certain amount of routine cleaning to remove dirt and grime. In humid places, vinyl is also susceptible to mold and mildew, which must also be removed. In many cases, the side manufacturer provides cleaning instructions, but if they are not available or you are not sure what type of vinyl is used on the wall, you can use any of the procedures below to clean the vinyl siding. Try the best Siding Contractors in Suffolk New York
Steps prior to cleaning
Since you will most likely spray your cleaning agent and water around your home, there are a few things you should do to protect items in and around your home.
* Close all doors and windows
* Turn off the main power if you have external electric units like ports, lights etc.
* Cover all etched glass or metal that could be damaged by the cleaning solution
* Remove all items that may get in your way, such as toys and outdoor furniture.
* Check for mold or rot around the sides. If you are not sure if it is mold or not, just apply a drop of bleach. It will turn white if there is mold or if it is in the main darkness.
How do you clean vinyl siding?
Use a pressure washer
In many cases, using garden hoses with a pressure washer or spray nozzle in a medium style is often enough to remove all the dirt and grime. When using a pressure washer to clean vinyl siding:
* Start washing from the bottom of the wall as you go slowly, then rinse the wall from the top, down.
* Be sure to set a spray pattern wide enough to avoid biasing the plate liner and always keep the washer moving.
* Water should not be allowed to pass behind the cap, so spray it onto the surface or ideally onto interfering joints, if any.
Use a vinyl siding cleaning solution
In some cases, vinyl siding may require additional cleaning. If so, you can add a cleaning solution to the water before using the pressure washer, or prepare the following mixture in a bucket before using it to clean the vinyl by hand.
* 1 gallon of water
* 1/3 cup powdered detergent
* 2/3 pieces TSP.
When the mixture is ready, dip the long hair soft hand brush into the solution, then use it to gently rub the edges. Start at the bottom and work your way up. Follow this with a pressure washer or regular garden hose to rinse off the solution, this time starting at the top and working your way down.
Remove mold and mildew
It is not uncommon for mold and mildew to form on vinyl, especially in humid climates. Using a commercial mold and mildew remover is the most common way to clean vinyl in such cases, but you can also use bleach to treat vinyl mold and mildew by adding one liter of bleach to each gallon of cleaning solution. after this:
* If there are garden plants near the house, wet them, or remove them or use a plastic sheet to cover them to prevent them from being damaged by bleach. Plants can easily be damaged by overheating if left covered with a plastic cap for a long time, so be sure to remove the cap as soon as it passes.
* Use the pump sprayer to moisten the sides with a diluted cleaning / bleaching solution. Make sure you are working from the bottom up.
* Leave the bleach solution on the wall for ten minutes or more.
* Rub the sides from top to bottom with a soft long-handled brush.
* Use a garden hose to rinse a dilute bleach solution from the liner starting from top to bottom
When working with chemical cleaners like bleach and TSP, be sure to wear gloves, long pants, long-sleeved shirts, and goggles. Carefully follow the instructions for cleaning products and avoid mixing bleach with other cleaners that contain vinegar, ammonia, or any other detergent because a chemical reaction can release dangerous chlorine gas.